Complete Re-Gripping Kit For 14 Golf Clubs - With 8oz HF-100 Solvent

Complete Re-Gripping Kit For 14 Golf Clubs - With 8oz HF-100 Solvent

Brampton
SKU:
GA-GKIT-X14-236ML-W
£11.95
(75 reviews)
Weight:
350.00 Grams
Current Stock:
Adding to cart… The item has been added
Description

The Complete Re-Gripping Kit - Everything You Need To Re-Grip Your Woods, Irons & Putter

Included in this re-gripping kit is everything a golfer will need to re-grip a complete set of golf clubs (14 clubs). 

Included: 

14 x Premium Double Sided Pre-Cut Grip Tape Strips 10” x 2”   

1 x Premium HF-100 Golf Grip Tape Solvent / Activator - 8oz (236ml)   

1 x Professional Rubber Vice Clamp Shaft Protector 

14 x Double Sided Pre-Cut Grip Tape Strips

Premium double-sided solvent activated grip tape strips - pre-cut to 10" x 2" for your convenience, thus saving re-gripping time.

These grip tape strips are used by PGA professionals, professional club fitters and golf club manufacturers throughout the world.

Specifications & Notes

Size:
25.4cm x 5cm (10" x 2")
Note:
The grip strips are designed to be slightly shorter in length than the golf grips - to prevent the need for trimming. 
Note:
Pre-cut strips have a backing film on both sides to prevent them from sticking together. Remove the backing film from both sides before applying solvent & fitting grips.

1 x Premium HF-100 Golf Grip Tape Solvent / Activator - 8oz (236ml Aprrox Enough To Re-Grip 14 Clubs)

Premium golf grip tape solvent – this product has been developed by Brampton Technologies Ltd.  This grip tape activator is a non flammable, non-toxic, non-ozone depleting, low VOC blend of surfactants, emollients, isoparaffins, and water.  HF-100 is completely ODC free and proper use can reduce VOC emission by up to 70%.

Engineered to have a slower evaporation rate HF-100 minimises ventilation requirements and is reusable.  When used as directed, HF-100 is very economical using 50% less than standard solvents. Appropriately called "The Grip Solution", HF-100 is odourless and colourless and works with any double sided grip tape.

Your golf grips will be playable in 10-15 minutes, without the need for any oven drying.

Remember, HF-100 golf grip solvent can be used time and time again and doesn't need to be disposed of after each re-grip.  

The Golf Grip Solution HF-100 Specifications

• Non-toxic

• Non-flammable

• Odourless

• Effective with all standard grip tapes

• Reusable

• Easy clean-up

• Economical - use half the normal amount to apply the golf grip 

1 x Professional Rubber Vice Clamp Shaft Protector

A vital piece of equipment for re-gripping your golf clubs, at a fantastic discount price.

A vinyl rubber construction, the Rubber Vice Clamp firmly secures the golf club shaft without any damage to the chrome or graphite finish of the shaft.

Get your re-gripping kit today from AdoreGolfGrips.com.

Reviews

Customers who liked this product said...

  • 5
    Easy to use

    Posted by Martin Evans on 18th Sep 2017

    Pre-cut tape with easy to peel edges makes the job quicker. Solvent and spray very effective with minimal wastage.

  • 5
    Perfect

    Posted by Marc on 2nd Mar 2017

    Don't even look for another product, works perfect.

  • 4
    Does what it says on the tin..

    Posted by JB on 20th Jul 2016

    Easy to apply (even without a vice). The hardest part of the whole process is actually taking off the old tape completely. So you may want to buy the specialist, rounded tool for that. Otherwise I found a flat chisel was ok, but took longer/was more hard work.

  • 5
    Did a perfect job.

    Posted by Kev on 8th Jul 2016

    Made regripping my clubs so easy.

  • 4
    Got to grips with it

    Posted by Michael Chalkley on 13th Jun 2016

    Last re gripped clubs over 20 years ago. So easy now. You do need a hook blade Stanley knife to safely remove the old grip. I poured the solvent into the new grip, covering the ends, shook it and then poured it over the tape with a bowl to catch the residue to use again rather than use the spray nozel on the bottle. Easy then to fit the new grip. The rubber vice fitting works well. Nice to do it yourself.

  • 4
    Got to grips with it

    Posted by Michael Chalkley on 13th Jun 2016

    Last re gripped clubs over 20 years ago. So easy now. You do need a hook blade Stanley knife to safely remove the old grip. I poured the solvent into the new grip, covering the ends, shook it and then poured it over the tape with a bowl to catch the residue to use again rather than use the spray nozel on the bottle. Easy then to fit the new grip. The rubber vice fitting works well. Nice to do it yourself.

  • 5
    Top fitting kit

    Posted by Website Customer on 23rd Dec 2015

    A fitting kit of double sided adhesive strips and spray made the grip fitting so simple.

  • 5
    first timer

    Posted by kseb on 3rd Oct 2015

    Easy to use, good instruction, can't fault it, will use again

  • 5
    Brilliantly easy re-grip kit

    Posted by Paul Hussey on 20th Aug 2015

    - less than 10 minutes a club from cleaning off (the worst bit) to taping and sliding! Easy to adjust and while a bit messy, it was a breeze.