Aerotech SteelFiber FC70 Graphite Iron Shaft (75g) - 0.370" Parallel Tip - Grey / Silver
Aerotech
£56.95
(No reviews yet)
Write a Review
Aerotech
Aerotech SteelFiber FC70 Graphite Iron Shaft (75g) - 0.370" Parallel Tip - Grey / Silver
The Power Of Graphite With The Stability Of Steel.
No two golfers are alike and no golf shaft is one-size-fits-all. The SteelFiber FC "Flight Control" graphite iron shafts combine the advanced composite technology of SteelFiber with variable tip stiffness, delivering a higher ball flight in the mid and long irons while maintaining the classic SteelFiber launch in the scoring irons.
The SteelFiber FC70 is available in both taper tip and parallel tip configurations. All Taper tip models also incorporate a "Constant Weight" feature meaning each shaft within the set (regardless of length) weighs the same.
Key Features
- Progressive tip stiffness delivers higher trajectory in mid & long irons.
- Steel fibers integrated into graphite composite produces a shaft more consistent in flex, geometry and straightness than steel iron shafts.
Aerotech Parallel Tip Iron Shaft - Trimming Instructions
The Aerotech 0.370 Parallel Tip Iron Shaft is a single length shaft that will be tip & butt trimmed to length to make a shaft for a specific club.
Example: Building a set 3 Iron to PW
Order 8 units from this listing in the desired flex.
You will receive 8 identical full length shafts.
Follow the instructions in the Trimming Guide below to tip & butt trim each shaft, to make a shaft for each specific club in the set.
Tip trim can be adjusted to fine tune playing characteristics.
Tip trim should not exceed (Parallel Tip - Hosel Depth).
Perform tip trim and then butt trim to final playing length.
Golf Shaft Specifications
- Brand:
- Aerotech
- Model:
- SteelFiber FC70
- Club:
- Iron
- Colour:
- Grey / Silver
- Parallel Tip:
- 7.5"
| Flex | Weight | Clubs | Tip Diameter | Butt Diameter | Raw Length | Ball Flight | Trim Code |
|---|---|---|---|---|---|---|---|
| F2 Senior (A) | 75g | 1i - 9i, W | 0.370" | 0.600" | 42" | Variable | IR36 |
| F3 Regular (R) | 75g | 1i - 9i, W | 0.370" | 0.600" | 42" | Variable | IR36 |
| F4 Stiff (S) | 75g | 1i - 9i, W | 0.370" | 0.600" | 42" | Variable | IR36 |
- Tip Size:
- 0.370" Parallel Tip
- Material:
- Graphite
- Ball Flight:
- Variable
